Ecosoft Water Softener 30L – Clack WS1 Valve
1.200,00 €
- ✅ True Hardness Removal: 30L ion-exchange softener removes calcium and magnesium hardness from the water, helping prevent new limescale formation.
- ✅ Clack WS1 Control Valve: US-made electronic metered valve monitors treated-water use and automatically controls regeneration according to the programmed settings.
- ✅ 30L Resin Capacity: Whole-property hard-water treatment when correctly sized for the property’s measured hardness, water consumption and peak demand.
- ✅ Adjustable Water Hardness: Integrated mixing adjustment allows residual hardness to be set according to the installation requirements.
- ✅ Limescale Protection: Helps control new scale formation in boilers, solar water heaters, washing machines, dishwashers, taps and pipework.
- ✅ Professional Installation: Available at an additional charge throughout Cyprus except Paphos district. Free product delivery across Cyprus, including Paphos.
- ✅ Salt Supply Available: WaterFilterNet can also supply and deliver regeneration salt for your softener.
🔧 Professional Installation Available
💧 Water Hardness Testing
🧂 Salt Supplies
📞 Local Cyprus Support
🏆 Serving Cyprus Since 2000
Description
ECOSOFT 30L • CLACK WS1 • ION EXCHANGE
Ecosoft 30L Water Softener with Clack WS1 — Hard Water & Limescale Protection
The Ecosoft 30L Water Softener with Clack WS1 valve is an automatic ion-exchange system for treating hard water throughout a property. Its 30-litre resin bed removes calcium and magnesium hardness from incoming water, helping prevent new limescale formation in plumbing, boilers, solar water heaters and water-using appliances.
The Clack WS1 metered control valve monitors treated-water use and automatically manages regeneration, while the integrated mixing adjustment allows residual hardness to be set according to the installation requirements.
What does the Ecosoft 30L water softener do?
The Ecosoft 30L uses ion exchange to remove calcium and magnesium hardness from incoming water. Removing these hardness minerals produces softened water and helps prevent new limescale deposits throughout the property’s water system.
- Resin: 30 litres of cation-exchange media
- Control: Clack WS1 CI electronic metered valve
- Regeneration: Automatic according to programmed capacity and water use
- Connections: 1-inch inlet/outlet for this configuration
- Hardness control: Integrated mixing adjustment
Including Paphos district.
Available at extra cost throughout Cyprus except Paphos district.
For correct selection and programming.
Regeneration salt and ongoing local support available.
Restaurants, offices, businesses and homes.
Learn more about hard water in Cyprus →
Why the Ecosoft 30L Works for Hard Water in Cyprus
Hard water can leave scale on taps and shower surfaces and create deposits inside water-heating equipment and appliances. Instead of simply trying to control the behaviour of these minerals, a true ion-exchange softener removes the calcium and magnesium hardness from the treated water.
Water-Heating Protection
Helps prevent new hardness-scale deposits in boilers, heating equipment and solar water-heating systems.
Less Scale on Surfaces
Softened water helps control new mineral deposits on taps, shower fittings, tiles and glass surfaces.
Better Soap Performance
Removing calcium and magnesium hardness improves soap lathering and can reduce the amount of soap and detergent required.
Equipment Protection
Helps reduce scale stress on washing machines, dishwashers and other equipment connected to the softened-water supply.
Ecosoft 30L vs No Water Softening
| Feature | Ecosoft 30L | No Softening |
|---|---|---|
| Calcium & magnesium hardness | ✅ Removed by ion exchange | ❌ Remains in water |
| New limescale formation | ✅ Strongly controlled | ❌ Continues |
| Soap performance | ✅ Improved | Hardness interferes with lathering |
| Scale stress on equipment | ✅ Reduced | ❌ Continues |
| Regeneration salt | Required — approx. 2.5–4.0 kg per regeneration | Not required |
| Regeneration drain | Required | Not required |
How the Ecosoft 30L Removes Hardness
Hard water contains dissolved calcium and magnesium ions. As the incoming water passes through the softener’s cation-exchange resin, these hardness ions are exchanged for sodium ions. The calcium and magnesium are retained by the resin and the treated water leaves the system softened.
After treating a certain quantity of hard water, the resin requires regeneration. A sodium-chloride brine solution restores the ion-exchange capacity of the resin, and the regeneration wastewater is discharged to drain. The Clack WS1 controller manages the regeneration process automatically according to its programmed settings.
Hardness removal is not the same as removing existing limescale.
The Ecosoft softener removes calcium and magnesium hardness from the incoming water. This helps prevent new scale formation. It is not a chemical descaling treatment and should not be described as physically removing limescale already deposited inside boilers, appliances or pipework.
Hardness is not the same as TDS.
A general TDS or conductivity measurement cannot tell you how much calcium and magnesium hardness is present. Correct softener selection and programming should be based on a proper water-hardness measurement.
Technical Specifications & Clack WS1 Control
The specifications below relate to this Ecosoft 30L configuration. Actual performance in a property depends on measured hardness, water pressure, consumption, peak flow and correct system programming.
| Specification | Value |
|---|---|
| System type | Automatic ion-exchange water softener |
| Resin / media quantity | 30 litres |
| Control valve | Clack WS1 CI electronic metered valve |
| Documented operating flow range | 1.5–6.2 m³/h |
| Salt per regeneration | 2.5–4.0 kg |
| Water per regeneration | 0.25 m³ (approximately 250 litres) |
| Pressure drop in service mode | 0.5 bar |
| Inlet pressure | 2–6 bar |
| Electrical requirement | 230 V / 50 Hz |
| Power consumption during regeneration | 30 W |
| Inlet / outlet connections | 1 inch |
| Dimensions (W × D × H) | 32 × 50 × 113 cm |
| Hardness adjustment | Integrated mixing adjustment |
| Regeneration drain | Required |
Why the Clack WS1 Valve Matters
📊 Metered Operation
The controller measures treated-water use so regeneration can be managed according to programmed capacity and consumption.
🔄 Automatic Regeneration
The WS1 automatically manages the programmed regeneration stages required to restore the softening resin.
💾 Settings Retained
Programming is stored in nonvolatile memory, helping retain the system configuration following a power interruption.
🎚️ Hardness Mixing
The integrated adjustment allows residual hardness to be blended back into the treated-water stream when required.
Clack WS1 valve certifications
Clack documentation lists the WS1 valve to NSF/ANSI 44, NSF/ANSI/CAN 61 and NSF/ANSI/CAN 372, with IP54 environmental protection and IP55 when used with the applicable weather cover. These certifications relate to the control valve itself.
Installation & Who This System Is Suitable For
A whole-property softener is normally installed on the main water supply where it can treat the water before distribution to the property’s plumbing and equipment. The correct position depends on the tank, pump, pipework and water-distribution layout.
📐 Space
Unit dimensions are 32 × 50 × 113 cm. Additional access is required for plumbing, salt filling and servicing.
🔧 Connections
This configuration has documented 1-inch inlet/outlet connections and requires a suitable regeneration drain.
⚡ Electricity
A 230 V / 50 Hz electrical supply is required for the automatic control system.
🧂 Regeneration Salt
Suitable sodium-chloride softener salt is required and must be replenished when necessary.
Rooftop & Outdoor Water Softener Installation Options
No suitable indoor space for a water softener? For suitable properties,
WaterFilterNet can provide a purpose-built insulated stainless-steel protective cabinet,
allowing the softener to be installed in an appropriate rooftop or outdoor location
while keeping the equipment enclosed and accessible for servicing.
🏠 Space-Saving Option
Useful where there is no suitable indoor utility or plant-room space for the softener.
🛡️ Protective Enclosure
The insulated stainless-steel cabinet provides a dedicated enclosure for the water-treatment equipment.
🔧 Service Access
The installation is planned with access for salt replenishment, inspection and servicing.
Real WaterFilterNet installation:
Rooftop water softener installed in a protective insulated cabinet in Cyprus.
Rooftop or outdoor installation suitability must be assessed individually.
The location still requires suitable plumbing, drainage, electrical supply,
service access and appropriate installation conditions.
Example of a rooftop water softener installation completed by WaterFilterNet in Cyprus using a protective insulated cabinet.
Rooftop or outdoor installation suitability must be assessed individually.
The location still requires suitable plumbing, drainage, electrical supply,
service access and appropriate installation conditions.
⚠️ Check Before Ordering
- Allow enough space for the unit, plumbing access, salt filling and servicing.
- The softener itself has 1-inch inlet/outlet connections; the installer can confirm the correct connection arrangement for your existing plumbing.
- A suitable drain point is required for regeneration discharge.
- A 230 V / 50 Hz electrical supply is required.
If you are unsure about the installation layout, contact us before ordering →
✅ Suitable when correctly sized for:
- Homes and villas with measured hard water
- Properties with scale problems on plumbing and equipment
- Homes with solar water-heating systems
- Properties with washing machines and dishwashers exposed to hard water
- Selected offices, cafés, restaurants and other commercial premises
❌ Not the correct treatment by itself for:
- Reducing TDS in drinking water
- Removing chlorine or organic contaminants
- Removing sediment from incoming water
- Water sources requiring treatment for iron, manganese or other contaminants
- Installations without a suitable regeneration drain
⚠️ Borehole or private-source water?
Have the water analysed before selecting the treatment system. Borehole water may contain hardness together with iron, manganese, sediment, salinity or other water-quality issues. A high TDS reading alone does not determine whether a water softener is the correct treatment.
Domestic & Commercial Applications
The Ecosoft 30L can be used in homes and in selected commercial applications when its capacity is correctly matched to the measured hardness, daily consumption and peak flow requirement.
Homes & Villas
Selected Cafés
Restaurants
Offices
Higher-demand properties: larger-capacity or duplex softening systems may be required for hotels, large restaurants and other high-demand commercial installations. Selection should be based on actual water demand and hardness.
Contact us to discuss commercial sizing →
Installation service:
Professional water-softener installation is available at an additional charge in Nicosia, Limassol, Larnaca and Famagusta districts, including Paralimni, Ayia Napa and Protaras. Free product delivery is available across Cyprus, including Paphos, but WaterFilterNet does not currently provide installation in Paphos district.
Salt, Regeneration & Maintenance
Salt-based ion-exchange softeners require regeneration and an ongoing supply of suitable softener salt. How often this happens depends on the property’s measured hardness, water consumption, available resin capacity and controller settings.
| Item | What to Expect |
|---|---|
| Salt per regeneration | Approximately 2.5–4.0 kg according to the product documentation. |
| Water per regeneration | Approximately 0.25 m³ / 250 litres. |
| Regeneration frequency | Variable — depends on hardness, consumption and system programming. |
| Salt top-up | Check periodically and replenish suitable regeneration salt when required. |
| System inspection | Periodic professional inspection helps verify regeneration, mechanical operation and treated-water hardness. |
WaterFilterNet can supply regeneration salt and provide local support for your softener. There is no reliable universal claim such as “one bag lasts X weeks” because salt consumption varies considerably between properties.
Need drinking-water treatment as well?
A water softener is designed for hardness removal; it does not reduce TDS in the same way as reverse osmosis. Where drinking-water TDS reduction or broader drinking-water treatment is required, consider a separate reverse osmosis system.
Ecosoft 30L Water Softener — Frequently Asked Questions
Does the Ecosoft 30L remove hard water?
It removes calcium and magnesium hardness from the water through ion exchange. The result is softened water with substantially reduced scale-forming hardness.
Does the Ecosoft 30L remove limescale?
It removes the hardness minerals responsible for limescale and therefore helps prevent new scale formation. It is not a chemical descaler for existing solid deposits already present inside equipment or pipework.
How much salt does it use?
The product documentation specifies approximately 2.5–4.0 kg of salt per regeneration. Monthly salt consumption depends on water hardness, water consumption and regeneration frequency.
How much water does regeneration use?
The documented water consumption is approximately 0.25 m³, or 250 litres, per regeneration cycle.
How often does the softener regenerate?
There is no fixed number of days that applies to every property. Frequency depends on measured hardness, water use, resin capacity and controller programming.
Can the treated-water hardness be adjusted?
Yes. This configuration includes a hardness mixing adjustment, allowing residual hardness to be blended back into the softened-water stream when required.
Is the Ecosoft 30L suitable for borehole water?
It may be suitable, but the water should first be analysed. Borehole water can contain hardness together with iron, manganese, sediment, salinity or other substances that may require additional treatment.
Does the Clack WS1 lose its programming during a power cut?
The controller stores programming in nonvolatile memory, so the system configuration is retained following a power interruption.
Do you install the Ecosoft 30L across Cyprus?
Professional installation is available at an additional charge throughout Cyprus except Paphos district. Free product delivery is available across Cyprus, including Paphos.
Is the Ecosoft 30L the Right Softener for Your Property?
Correct sizing depends on your water hardness, consumption and peak water demand. Send us your hardness result or arrange a water test and we can help you choose the appropriate system.
Free delivery across Cyprus • Professional installation available at extra cost throughout Cyprus except Paphos district
Stavros is a professional water quality specialist and holds an extensive knowledge of various water filtration technologies, including reverse osmosis, water softeners, water purification systems and additional water treatment techniques for residential and commercial use. He has written extensively on the subject of water filtration and treatment, with his work appearing in industry publications such as Water Technology and Water Quality Products.
In addition to his professional work, Stavros supports the environmental sustainability and is committed to promoting eco-friendly water filtration solutions. He believes that everyone has to have access to clean, safe drinking water and is dedicated to helping people achieve this goal.
Stavros resides in Larnaca Cyprus with his family and enjoys sailing. He can be reached at tel: +357 99626069 and is available to provide expert advice on all aspects of water filtration systems, including installation, maintenance, and replacement filters.
- How to Use SodaStream Duo – Step by Step Guide - June 30, 2026
- 12 Easy Homemade SodaStream Recipes & Natural Soda Syrups - June 25, 2026
- Tankless Reverse Osmosis Systems Cyprus: Tankless vs Traditional RO Tanks - June 8, 2026
Related products
-
SodaStream CO2 Cylinder – Spare 60l Co2 gas for Soda Makers Filled
Price range: 50,00 € through 120,00 €Select options This product has multiple variants. The options may be chosen on the product page -
-
Sodastream Quick Connect co2 cylinder 60L for models Art, Terra and Duo
Price range: 50,00 € through 120,00 €Select options This product has multiple variants. The options may be chosen on the product page -
