Aquaphor APRO-IM-500-PLUS Mobile Commercial Reverse Osmosis & Deionisation System – 500 L/h

4.500,00 €

  • ✅ 500 L/h Professional Output: High-capacity mobile reverse osmosis for demanding cleaning and technical applications.
  • ✅ RO + Deionisation: Mixed-bed post-treatment polishes the RO permeate for extra-low conductivity.
  • ✅ Mobile Plug-and-Play Design: Complete system mounted on a wheeled frame for use at changing work locations.
  • ✅ Professional Cleaning Applications: Designed for windows, solar panels, car washing and heating-system filling.
  • ✅ Complete Factory Configuration: Includes prefiltration, two RO membranes, mixed-bed cartridge, Grundfos feed pump, smart controller and 14 L tank.
🚚 Free Delivery Across Cyprus📞 Local Cyprus Support🏆 20+ Years Experience⚙️ Aquaphor Professional

MOBILE RO + DI WATER TREATMENT

High-flow purified water wherever the job takes you

The Aquaphor Professional APRO-IM-500-PLUS combines high-capacity reverse osmosis with mixed-bed deionisation on a wheeled mobile frame. Rated at 500 litres per hour, it is built for professional applications that need very low-mineral water without installing a permanent treatment plant.

What is the Aquaphor APRO-IM-500-PLUS?

The APRO-IM-500-PLUS is a portable all-in-one professional water purification station. It combines prefiltration, a fully automatic 500 L/h reverse osmosis system and mixed-bed post-treatment for extra-low conductivity permeate, with the equipment assembled on a wheeled frame for mobile use.

WHY CHOOSE IT

Built for professional mobile water purification

500 L/h RO capacity

Manufacturer-rated permeate production of 500 litres per hour supports demanding professional cleaning and technical applications.

RO + mixed-bed polishing

The PLUS model adds mixed-bed post-treatment after reverse osmosis to produce extra-low-conductivity permeate.

Mobile, wheeled design

The complete system is assembled on a wheeled frame, allowing it to be moved between suitable work locations rather than permanently installed.

Automatic operation

A smart controller and Grundfos feed pump are included in the factory configuration for user-friendly operation and start-up.

HOW IT WORKS

Three treatment functions in one mobile station

1. B520-PRO-AS prefiltration

High-capacity prefiltration with an antiscalant effect helps protect the RO membranes and equipment from scaling.

2. Reverse osmosis

Two XLP11-4040 RO membranes provide the main dissolved-solids reduction stage, with permeate production rated at 500 L/h.

3. Mixed-bed deionisation

The PLUS-specific mixed-bed cartridge polishes the RO permeate further for applications where extra-low conductivity is important.

Professional applications

Aquaphor identifies the APRO-IM series for professional window cleaning, solar-panel cleaning, car washing and filling heating systems. The PLUS model is particularly useful where mixed-bed polishing and very low mineral content are required.

For washing applications, Aquaphor states that purified water can reduce detergent consumption by up to three times, depending on the application and operating conditions.

CHECK BEFORE ORDERING

Make sure this is the right type of RO system for your job

A strong fit when

  • You need mobile purified-water production at different work locations.
  • Your application benefits from RO followed by mixed-bed deionisation.
  • You require up to 500 L/h manufacturer-rated permeate capacity.
  • Your incoming water TDS is within the manufacturer’s stated maximum of 2,000 ppm.

Check with us first when

  • You are choosing a system for a process not listed by the manufacturer.
  • Your feed water is unusually saline or has challenging water chemistry.
  • You need a guaranteed final conductivity for a specific industrial process.
  • You need help confirming water, power, drainage or operating requirements at the intended site.

Important: this is not a conventional under-sink drinking-water RO system

The APRO-IM-500-PLUS is a high-capacity mobile professional RO/DI station. Choose it for the professional applications and water-quality requirements it is designed to serve, rather than as a substitute for a normal domestic drinking-water filter.

TECHNICAL DETAILS

Aquaphor APRO-IM-500-PLUS specifications

Specification APRO-IM-500-PLUS
System type Portable all-in-one RO + mixed-bed water purification station
Permeate capacity 500 L/h
Maximum inlet TDS 2,000 ppm
RO membranes 2 × XLP11-4040
Prefiltration B520-PRO-AS cartridge with antiscalant effect
Post-treatment Mixed-bed cartridge
Feed pump Grundfos
Permeate tank 14 L
Manufacturer-listed power value 0.65 kWh (unit as stated in Aquaphor datasheet)
Dimensions (L × W × H) 780 × 490 × 1320 mm
Manufacturer product code 526558

FACTORY CONFIGURATION

What is included

  • 2 × VIKING prefilter housings
  • 1 × B520-PRO-AS prefilter cartridge
  • 1 × mixed-bed cartridge
  • 2 × XLP11-4040 reverse osmosis membranes
  • 1 × Grundfos feed pump
  • 1 × electrical panel with smart controller
  • 1 × 14 L permeate accumulation tank
  • Wheeled mobile frame carrying the complete equipment assembly

OWNERSHIP & DELIVERY

Mobile setup with support across Cyprus

No permanent installation

This is a mobile machine rather than a permanently installed WaterFilterNet system. It is moved to the work location and connected to suitable water, power and drainage for operation.

Replaceable treatment components

Routine ownership includes monitoring the prefilter, mixed-bed media/cartridge and RO membranes according to water quality, usage and system performance.

Free delivery across Cyprus

Free delivery is available throughout Cyprus, including Nicosia, Limassol, Larnaca, Paphos and the Famagusta area. If you are comparing solutions, explore our commercial water treatment systems and reverse osmosis systems.

FAQ

Aquaphor APRO-IM-500-PLUS FAQs

What is the output of the APRO-IM-500-PLUS?

Aquaphor rates the system for 500 litres per hour of permeate. Actual operating performance can vary with feed-water conditions.

What makes the PLUS model different?

The APRO-IM-500-PLUS includes mixed-bed post-treatment after reverse osmosis. Aquaphor specifies this mixed-bed module for the PLUS model to provide extra-low-conductivity permeate.

Does it need permanent installation?

No permanent installation is required. The system is mounted on a mobile wheeled frame and is intended for plug-and-play operation at a suitable work location with the necessary water, electrical and drainage connections.

Can it be used for window and solar-panel cleaning?

Yes. Aquaphor specifically identifies professional window cleaning and solar-panel cleaning among the intended applications of the APRO-IM series.

What feed-water TDS can it accept?

The manufacturer specifies a maximum inlet TDS of 2,000 ppm. Water chemistry and the required final water quality should still be considered when selecting a system for a specific process.

Where is delivery available?

WaterFilterNet provides free delivery across Cyprus. Contact us before ordering if you need help confirming whether the system suits your application or feed-water conditions.

AQUAPHOR PROFESSIONAL

Need 500 L/h mobile RO + DI water treatment?

Before ordering the APRO-IM-500-PLUS, ask WaterFilterNet to confirm that its 500 L/h RO + mixed-bed configuration suits your application, feed-water conditions and required final water quality. The system is available for €4,500 with free delivery across Cyprus.

waterfiltersystems

Reviews

There are no reviews yet.

Be the first to review “Aquaphor APRO-IM-500-PLUS Mobile Commercial Reverse Osmosis & Deionisation System – 500 L/h”

Your email address will not be published. Required fields are marked *

WhatsApp Call +357 99 626 069 Call Us